Thermal Instability of A Polymer Panel Reinforced with Glass Particulates
DOI:
https://doi.org/10.5281/zenodo.18062068Keywords:
polymers reservoirs, glass particulates, thermal buckling, mechanical strengthAbstract
Water and oil reservoirs are commonly made from polymers. To enhance their mechanical strength, the technique of incorporating short glass particulates into the polymers is employed. This method improves the overall reliability of the reservoirs. The objective of this study is to analyze the thermal instability that occurs during the buckling of panels in these reservoirs. Previous research has shown that the addition of short glass particulates can negatively impact thermal buckling. In the first stage of this study, polymers will be mixed with 10% and 20% short glass particulates, and a calculation script will be developed to determine the thermal buckling behavior.
References
Benfrid, A., Benbakhti, A., Harrat, Z.R., Chatbi, M., Krour, B., Bouiadjra, M.B., 2023. Thermomechanical analysis of glass powder based eco-concrete panels: Limitations and performance evaluation. Periodica Polytechnica Civil Engineering, 67(4):1284–1297.
Błaszczyński, T., Przybylska-Fałek, M., 2015. Steel fibre reinforced concrete as a structural material. Procedia Engineering, 122: 282–289.
Chatbi, M., Krour, B., Benatta, M.A., Harrat, Z.R., Amziane, S., Bouiadjra, M.B., 2022. Bending analysis of nano-SiO₂ reinforced concrete slabs resting on elastic foundation. Structural Engineering and Mechanics, 84(5): 685–697.
Chawla, R., 2000. Fiberglass reinforced composites. Materials Science and Engineering: R: Reports, 31(1): 1–35.
Cheng, X., 2018. Thermal Elastic Mechanics Problems of Concrete Rectangular Thin Plate. Springer.
Doumouro, J., Perros, E., Dodu, A., Rahbany, N., Leprat, D., Krachmalnicoff, V., De Wilde, Y., 2021. Quantitative measurement of the thermal contact resistance between a glass microsphere and a plate. Physical Review Applied, 15(1): 014063.
Elhennani, S.D., Harrat, Z.R., Chatbi, M., Belbachir, A., Krour, B., Işık, E., Harirchian, E., Bouremana, M., Bouiadjra, M.B., 2023. Buckling and free vibration analyses of various nanoparticle reinforced concrete beams resting on multi-parameter elastic foundations. Materials, 16(17): 5865.
Han, G., Wan, M., Su, A., Li, B., 2025. Thermal buckling and post-buckling behavior of FGM laminate plates reinforced with graphene nanoplatelets. Multiscale and Multidisciplinary Modeling, Experiments and Design, 8(5): 256.
Harrat, Z.R., Amziane, S., Krour, B., Bouiadjra, M.B., 2021. On the static behavior of nano SiO₂ based concrete beams resting on an elastic foundation. Computers and Concrete, 27(6): 575–583.
Hilali, Y., Rassam, M., Mesmoudi, S., Sitli, Y., Elmhaia, O., Rammane, M., Bourihane, O., 2025. A high-order approach for thermal buckling and post-buckling analysis of functionally graded sandwich beams. Acta Mechanica, 236(6): 3543–3563.
Ike, C., 2024. Buckling analysis of Euler–Bernoulli beams resting on two-parameter elastic foundations: closed form solutions. Iraqi Journal of Civil Engineering, 18(2): 131–149.
Ike, C., 2024. Ritz variational method for buckling analysis of Euler–Bernoulli beams resting on two-parameter foundations. Iraqi Journal of Civil Engineering, 18(1): 26–49.
Ike, C.C., 2025. Analysis of single variable thick plate buckling problems using Galerkin method. NIPES Journal of Science and Technology Research, 7(2): 235–252.
Kechir, A., Chatbi, M., Harrat, Z.R., Bouiadjra, M.B., Bouremana, M., Krour, B., 2024. Enhancing the mechanical performance of concrete slabs through the incorporation of nano-sized iron oxide particles (Fe₂O₃): Non-local bending analysis. Periodica Polytechnica Civil Engineering, 68(3): 842–858.
Khaloo, A.R., Afshari, M., 2005. Flexural behaviour of small steel fibre reinforced concrete slabs. Cement and Concrete Composites, 27(1): 141–149.
Mallick, P.K., 2000. Effect of fiber orientation on mechanical properties of glass fiber reinforced polymers. Composites Science and Technology, 60(15): 2739–2750.
Mohod, M.V., 2012. Performance of steel fiber reinforced concrete. International Journal of Engineering and Science, 1(12): 1–4.
Mujalli, M.A., Dirar, S., Mushtaha, E., Hussien, A., Maksoud, A., 2022. Evaluation of the tensile characteristics and bond behaviour of steel fibre-reinforced concrete: An overview. Fibers, 10(12) : 104.
Sayyad, A.S., Ghugal, Y.M., 2014. A new shear and normal deformation theory for isotropic, transversely isotropic, laminated composite and sandwich plates. International Journal of Mechanics and Materials in Design, 10(3): 247–267.
Turan, F., 2024. Critical buckling load analysis of porous orthotropic two-layered cylindrical panels based on trigonometric shear deformation theory. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 1–17.
Turan, F., Basoglu, M.F., Hoang, V.N.V., 2025. Lateral torsional stability of porous thin-walled I-beams with nonuniform porosity distributions subjected to a uniformly distributed load. Acta Mechanica, 236(1): 153–171.
Vikhareva, I.N., Buylova, E.A., Yarmuhametova, G.U., Aminova, G.K., Mazitova, A.K., 2021. An overview of the main trends in the creation of biodegradable polymer materials. Journal of Chemistry, 2021(1): 5099705.
Zhang, N., Khan, T., Guo, H., Shi, S., Zhong, W., Zhang, W., 2019. Functionally graded materials: an overview of stability, buckling, and free vibration analysis. Advances in Materials Science and Engineering, 2019(1): 1354150.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 ISPEC JOURNAL OF SCIENCE INSTITUTE
This work is licensed under a Creative Commons Attribution 4.0 International License.
